Videotec DCT - Manual (Page 112)

6.10.6 Patrol (Panasonic WV-CS600)
In the Main menu press the PATROL key to enter the menu for carrying out the movement controls.
START PATROL
To start the PATROL.
STOP PATROL
To stop the function in progress.
If activated, this function can only be stopped by pressing the STOP PATROL key. If the joystick is
moved the dome will continue with the active PATROL.
6.10.7 Patrol (Panasonic WV-CS850)
In the Main menu press the PATROL key to enter the menu for carrying out the movement controls.
START PATROL
To start the PATROL.
STOP PATROL
To stop the function in progress.
SET PATROL
To set up the sequence used to carry out the
PATROL.
If activated, this function can only be stopped by pressing the STOP PATROL key. If the joystick is
moved the dome will continue with the active PATROL.
6.10.8 Preset, Scan and Home
The PRESET, SCAN and HOME functions are described in sections (§ 4.4.1.1 - PRESET, page 46 and §
4.4.2 - SCAN MENU, page 48).
Refer to § 9.2.1 – Dome, page 165 to check the specific limits of the dome.
The HOME function loads a specific position which has been set in the dome OSM.
See the specific handbook for the dome.
6.10.9 Special codes
Some parameters can be configured by inserting a special code.
Go to the page for inserting special codes (see § 6.1.5 - Layout of the configuration menus, page 76) and
insert the numeric values using the keypad.
Page 110 of 176 MNVADCT03_0716