Videotec DCT - Manual (Page 134)

6.17.7 Special codes
Some parameters can be configured by inserting a special code.
Go to the introduction screen for the Special codes (see § 6.1.5 - Layout of the configuration menus, page 76)
and use the keypad to insert the numeric values.
Code Function
SPEED CURVES
11
First speed curve
12 Second speed curve
13 Third speed curve
14 Fourth speed curve (default)
POSITIONING LIMITS
400
Set the right horizontal positioning limit.
401 Set the left horizontal positioning limit.
402 Set the top vertical positioning limit.
403 Set the bottom vertical positioning limit.
404 Enable the positioning limits.
405 Disable the positioning limits.
HOME POSITION
410
Home position: can be loaded
411 Home position: cannot be loaded
OTHER
1XXX
XXX = 001 ÷ 255: Duration of pause before loading the Home position
2XXX XXX = 001 ÷ 255: Approach speed to Preset position after a Scan
9999 Reset receiver remote
Page 132 of 176 MNVADCT03_0716