Videotec DCT User Manual
Page 100
6.8.4
Autopan, Focus, Iris
All these functions can be loaded by pressing the specific keys in the control menu area of the Main menu (see
§ 4.4 – Control menu area, page 45).
Check § 9.1 – Functions assigned to the most common graphics keys, page 164 and § 9.2.1 – Dome, page 165
to find out which functions are available for the dome.
6.8.5
Patrol (Tour)
In the main menu press the PATROL button to enter the menu for carrying out the movement controls.
START TOUR 1…4
To start the corresponding Tour.
If this function has been started, the only way to stop it is by moving the joystick.
Use the dome OSM to define Tours 1..4.
6.8.6
Preset, Scan e Home
The PRESET, SCAN and HOME functions are described in sections (§ 4.4.1.1 - PRESET, page 46 and §
4.4.2 - SCAN MENU, page 48).
Check § 9.2.1 – Dome, page 165 to find the specific limits for the dome.
6.8.7
Function keys
In the main menu press the PROG button (see § 4.4.1 - PROG MENU, page 46) and then the
key to enter
the menu for activating particular controls.
F1
Stabilize.
F2
Day-Night.
See the dome handbook.
Page 98 of 176
MNVADCT03_0716