Videotec DCT User Manual
Page 30
4.2.4
Accepted values
This menu is divided into a series of submenus that are used to set up the accepted values for the keyboard.
Select the item of interest and press the “
ent
” key.
4.2.4.1
Matrix, multiplexer and DVR cameras connected locally
This menu is used to enable the cameras that can be selected from the keyboard.
In all cases the active camera status is indicated by the presence of the letter A or B to show that the camera is
connected to telemetry A or B (see § 5.1 - Introduction, page 51 and see § 4.3 - Video/telemetry control area,
page 44).
WARNING: If the camera present in the system is fixed (not equipped with Pan & Tilt movement),
to operate it you will need to associate it with one of the two telemetries (A or B).
Page 28 of 176
MNVADCT03_0716