Videotec DCT - Manual (Page 47)

4.4 Control menu area
AUTOPAN MENU
To enter the graphics page for operating the specific AUTOPAN function for each device.
AUTOFLIP MENU
To enter the graphics page for operating the specific AUTOFLIP function for each device.
AUX MENU
To enter the graphics page for operating the AUX function, that is, for controlling the auxiliary
relays present in the controlled device.
FOCUS MENU
To enter the graphics page for operating the specific FOCUS function for each device.
IRIS MENU
To enter the graphics page for operating the specific IRIS function for each device.
PATROL MENU
To enter the graphics page for operating the specific PATROL function for each device.
PROG MENU
To enter the graphics page for operating the PRESET, DOME setup, VIDEO setup functions, and
any specific function keys for the domes/receivers.
(see § 4.4.1 - PROG MENU, page 46)
SCAN MENU
Used to load the numeric keypad for selecting one of the positions that was saved previously using
the PRESET function.
(see § 4.4.2 - SCAN MENU, page 48)
WIPER/WASHER MENU
To enter the graphics page for operating the WIPER and WASHER functions.
MACRO KEYS MENU
To enter the graphics page for operating the programmed control macros.
(see § 4.4.3 - MACRO KEYS MENU, page 49)
Page 45 of 176 MNVADCT03_0716