Videotec DCT User Manual
Page 83
6.3.6
Function keys
In the Main menu, pressing the PROG key (see § 4.4.1 - PROG MENU, page 46) and then the
key, will
enter the menu for carrying out specific commands.
F1
Associated function: “Movement to
the last requested Scan position”.
F2
Associated function: “Movement to the alarm return
position”.
See the dome handbook.
6.3.7
Special codes
Some parameters can be configured by inserting a special code.
Go to the page for inserting special codes (see § 6.1.5 - Layout of the configuration menus, page 76) and use
the keypad to insert the numeric values.
Code
Function
SPEED OF MOVEMENT OF DOME
0
Variable speed mode
1
Fixed speed mode
1X
X = 1 ÷ 8: set the fixed speed value (1 = low, 8 = high)
VIDEO SIGNAL
2
Video signal in colour
3
B&W video signal
ZOOM / FOCUS SPEED
2X
X = 1 ÷ 8: zoom speed (1 = low, 8 = high)
3X
X = 1 ÷ 8: focus speed (1 = low, 8 = high)
WHITE BALANCE
41
Automatic
42
Manual
MOVEMENT LIMITS
51
Set
52
Erase
53
Set
54
Erase
AUTOSCAN CONTROL
61
Start normal autoscan
62
Stop normal autoscan
Page 81 of 176
MNVADCT03_0716