Videotec DCT - Manual (Page 60)

5.3.3 Linxs video matrix (VIDEOTEC)
5.3.3.1 LXRPS42A , LXRPS82A , LXRPS84A , LXRPS164A models
5.3.3.1.1 Connection and operational test
The communication cable is standard (see § 3.3 - One keyboard per line: standard connection cable, page 15).
On completing the connection it should be immediately possible to switch the input videos using the
video/telemetry controls.
5.3.3.1.2 Matrix setup
It is possible to modify matrix setup via the corresponding menu (see § 5.3.4.3 - LINXS OSM (VIDEOTEC),
page 59).
5.3.4 Video matrix setup
The matrixes can be configured from the keyboard using a specific menu that depends on the matrix model
used. In order to be able to do this, it is first necessary to enable Setup Mtx/DVR/MUX (see § 4.2.4.5 -
Functions, page 35).
The example shows entry to the Macro OSM.
MACRO OSM
5.3.4.1 Macro OSM
ENTER SETUP
To enter the matrix OSM.
The other keys and their corresponding symbols are described in the specific handbook for the matrix.
Page 58 of 176 MNVADCT03_0716