Videotec DCT - Manual (Page 127)

Code Function
14 Relays 1 and 4 On
23 Relays 2 and 3 On
24 Relays 2 and 4 On
34 Relays 3 and 4 On
123 Relays 1, 2 and 3 On
124 Relays 1, 2 and 4 On
134 Relays 1, 3 and 4 On
234 Relays 2, 3 and 4 On
1234 Relays 1, 2, 3 and 4 On
Example “13”: trips only relays 1 and 3 (relays 2 and 4 are off)
“134”: trips only relays 1, 3 and 4 (relay 2 is off)
PATTERN
51 Start recording pattern 1
52 Start recording pattern 2
53 Start recording pattern 3
55 Accept the new pattern and replace the previously defined pattern
56 End recording pattern
61 Start pattern 1
62 Start pattern 2
63 Start pattern 3
71 Delete pattern 1
72 Delete pattern 2
73 Delete pattern 3
Example To define pattern 2:
“72”: delete the old pattern 2 (which will be assigned the APPLE PEEL function)
“52”: start recording pattern 2
...make the dome movements within the limits shown on the screen..
“56”: end of recording
“55”: replace the old pattern with the new recording
“62”: start the new pattern 2
OTHER
9999 Reset camera remote
Page 125 of 176 MNVADCT03_0716