Videotec DCT - Manual (Page 163)

7.4.3.12.3 Example 2
Maps: Start Patrol No. 2 of dome No. 2 and at the same time Set of Aux No. 1 (Telemetry only)
1. Select and enter the monitor number
(No. 1 even if there are only
telemetry controls)
2. Select and enter the camera
number.
3. Select the “Set” option button enter
the Aux number.
4. Select the “Start” option button and
enter the Patrol number.
5. Save and exit.
7.4.3.12.4 Example 3
Maps: Scan to position No. 5 of dome No. 2 assigned to monitor No. 3 of the matrix
1. Select and enter the monitor
number.
2. Select and enter the camera number.
3. Select the “To position” option
button and enter the Scan number.
4. Save and exit.
Page 161 of 176 MNVADCT03_0716
1
2
3
4
5
1
2
3
4