Dimensions of the 2130ib board – Lenze 2130IB User Manual
Page 16
![background image](/manuals/565873/16/background.png)
L
14
2.3.
Dimensions of the 2130IB board
Connections of 2130IB
X12
X13
V1
V2
View of 2130IB with front plate
Explanations:
X4
Automation interface
34-pole plug connector for the
connection with the control board of
the controller
X12
RS485 bus connection
9-pole SubD socket
(only 2130IB.V001)
X13-W30 OFC receiver
(only 2130IB.V002)
X13-W31 OFC transmitter
(only 2130IB.V002)
V1
(LED green) supply 2130
OFF: Module has no supply voltage.
The controller is switched off or the
connection to the controller is
interrupted (X4).
ON:
Module has supply voltage.
V2
(LED yellow) Communication
2130
OFF: No supply or 2130 and controller is
not initialized.
ON:
Module 2130 and base device are
initialized but there is no
PROFIBUS communication.
FAST FLASHING: (4 times per sec.)
PROFIBUS-DP communication
with user data
SLOW FLASHING: (once per sec.)
PROFIBUS-FMS communication
is established