Lenze 2130IB - Manual (Page 35)

33
Code
L-C Name Parameter
(Factory setting is printed in bold) Your
settings
1904 min T
SDR
11 to 255 Bit-times
11
(L-C1900 = 0)
125 (L-C1900 = 1;L-C1902 = 2)
250 (L-C1900 = 1;L-C1902 = 3)
255 (L-C1900 = 1;L-C1902 = 4)
255 (L-C1900 = 1;L-C1902 = 6)
Minimum reaction time of the controller on a telegram
of the master (protocol acknowledgement). The
setting is in bit-times and therefore depends on the
selected baud rate.
Setting is only possible in the PROFIBUS operating
mode mixed operation (L-C1900 = 1).
1905 DP parameter
setting
channel -0- inactive
-1- active
DRIVECOM parameter setting channel for DP
operation; i.e. DRIVECOM and Lenze parameters can
also be accessed during the user-data phase.