Lenze 2130IB - Manual (Page 4)

L
2
Safety information
The equipment described is intended for use in industrial drive
systems.
This equipment can endanger life through rotating machinery and
high voltages, therefore it is essential that guards for both electrical
and mechanical parts are not removed.
The following points should be observed for the safety of the
personnel:
•
Only qualified personnel familiar with the equipment are
permitted to install, operate, and maintain the devices
• System documentation must be available and observed at all
times.
•
The system must be installed in accordance with local
regulations.
A qualified person is someone who is familiar with all safety notes
and established safety practices, with the installation, operation and
maintenance of this equipment and the hazards involved. It is
recommended that anyone who operates or maintains the electrical
or mechanical equipment should have a basic knowledge of First
Aid. As a minimum, they should know where the First Aid equipment
is kept and the identity of the official First Aiders.
These safety notes do not represent a complete list of the steps
necessary to ensure safe operation of the equipment. If you require
further information, please contact your nearest Lenze
representative.
The information in these operating instructions applies only to the
hardware and software versions that are indicated on the cover
page.
The specifications, processes, and circuitry described in these
operating instructions are for guidance only and must be adapted to
your own specific applications.
Lenze does not guarantee the suitability of the processes and circuitry
described in these operating instructions.
The specifications in these operating instructions describe the
features of the products, without guarantee.
Lenze personnel have carefully checked these operating
instructions and the equipment it describes, but cannot be held
responsible for its accuracy.