Lenze 2130IB - Manual (Page 2)

These operating instructions are valid for the interface modules as of nameplate designation:
2130 IB 0x. 0x. V001 PROFIBUS-FMS/DPwith RS485
2130 IB 0x. 0x. V002 PROFIBUS-FMS/DP with
optical fibre cable
together with the controller series as of
4900 E
3x. 5x.
DC controller
8600 E 5x. 6x. Frequency inverter
9200 E 4x.
4x.
5x. 4x.
5x.
5x. Servo controller
2211 PP. 0B. 1x. Position control
2212 WP. 0B. 1x. Winding calculator
Controller type
Design
Hardware version + index
Software version + index
Variant
Explanation
Important:
These operating instructions are only valid together with the
operating instructions of the suitable controllers or automation
modules!
corresponds to the German edition of 15 February, 1995
revised
Edition of: 10.04.1995
Date of print: 24.04.1995