Rockwell Automation 1771-PD PID MODULE (+DU) User Manual
Page 229
Summary Word and Bit Tables
Appendix D
DĆ8
W67(W74)
READ FFV
BCD
+9999
W61 (W68) B13
[2
[1}
The expanded features bir W01 B14 musr be set to use these features.
[2]
Word and bit numbers such a W30(W50)B07,B06 are independent of the word nubmer at the top of the column.
Table D.C
Master Control Word W01
Bit
Title
Status
B17,B16
Block identifier
0=not allowed
B15
Loop select
0=both loops
1=loop 1, only
B14
Standard/expanded features
0=standard
1=expanded
B13
Calibration
0=normal operation
1=calibration
B12
Binary/BCD format
0=BCD W05,W09,W10,W12,W16,W17
1=Binary W63,W64,W66,W70,W71,W73
B11
Set point format
0=BCD W06(W13)
1=binary
B10
Soft fault reset
0=reset
1=enable
B07
Loop time/diagnostic
0=loop time
1=diagnostic W60
B06
Load
0=reset
1=enable
B05,B04
Verify
0=normal operation
1=undefined
B03
Enter
0=reset
1=enable
B02
SET OUT2
0=reset
1=enable SET OUT2 in W12
B01
SET OUT1
0=reset
1=enable SET OUT1 in W05
B00
Set manual request
0=reset
1=enables contact output