Rockwell Automation 1771-PD PID MODULE (+DU) User Manual
Page 43
Assembly and Installation
Chapter 2
2Ć30
125V dc (voltage)
10mA maximum load current.)
analog circuit and control logic)
Temperature Coeffeicient
Digital Resolution
Keying
+50 ppm/
0
C
12Ćbit binary, 1 part in 4095
Left connector (slot 0) between 8
Tieback Inputs
Accuracy
and 10, 18 and 20
Number
+0.1% of range at 25
0
C
Right connector (slot 1) between 2
tieback input 1
Temperature Coefficient
and 4, 28 and 30
tieback input 2
+50 ppm/
0
C
[1]
If all analog outputs and tieback inputs
Configuration
Contact Output
used are selected to current mode, the
Single ended
Number
compliance of the analog outpus can be
Range (userĆselectable)
one normally closed contact,held
extended from 500ohms (standard compliĆ
+4 to +20mA
open
ance to 1250 ohms(additional compliance).
+1 to +5V dc
Peak Voltage
This is achieved by internally referencing the
30V
outputs to Ć15V dc.