Fault reset (rst), Monitor variable (mdm), Fault reset (rst) -3 monitor variable (mdm) -3 – Rockwell Automation 2092-DAx Ultra1500 Host Commands for Serial Communication Reference Manual User Manual
Page 15: Fault reset (rst) monitor variable (mdm)
Advertising
Publication 2092-RM001A-EN-P — March 2005
Command Reference
2-3
Fault Reset (RST)
Monitor Variable (MDM)
Command:
RST
Description:
Clear fault
Format:
STX ID # RST : BSS ETX
Response:
ACK
Usage Note:
Fault Reset will have no effect if action was not taken to resolve the
problem causing the fault.
Command:
MDM
Description:
Monitor variables
Format:
STX ID # MDM P1 P2 P3 P4 P5 : BSS ETX
Data:
Argument
Description
P1-P5
Variables to monitor.
Refer to Monitor Variables on page A-3 for the
list of variables.
Usage Note:
MDM command can monitor up to 5 variables. See Appendix A for
the list of variables.
Response Format: STX ID $ MDM V1&V2&V3&V4&V5 : BSS ETX
Response Data:
Argument
Description
V1 to V5
Variable values are 4 or 8 bytes signed
Advertising