Rockwell Automation 2092-DAx Ultra1500 Host Commands for Serial Communication Reference Manual - Manual (Page 62)

Publication 2092-RM001A-EN-P — March 2005
A-2 Error Codes, Warnings, and Monitor Variables
Warnings Warnings are drive abnormalities that allow motor control to continue. A
three-digit text message is displayed using the last segments of the drive's
Status display.
E102 InSOL Motor Instantaneous Current Overload 0x21
E103 MAtCH Motor Mismatch 0x28
E104 PWroL Continuous Power Overload 0x26
E105 EnCtP Encoder Type Mismatch 0x30
E106 EnCCE Encoder Communication Error 0x32
E107 SErCE Serial Communication Error 0x60
E108 CdFrE Position Command Frequency Error 0x52
Fault Display Fault Name Fault Code
Warning Display Warning Name Warning Code
bAt Absolute Encoder Battery 0x01
PrE Power Up Overspeed 0x04
oCC Over Current Command 0x08
oSC Over Speed Command 0x10
PIn Digital I/O Assignment 0x20
nA Reserved 0x02