Rockwell Automation 20D PowerFlex 700S with Phase I Control Reference Manual - Manual (Page 168)

168 Rockwell Automation Publication PFLEX-RM002D-EN-E - August 2013
Chapter 1 Detail Drive Configuration and Operation
Master PowerFlex 700S Drive Setup (Transmitting Drive)
1. In the master, or transmitting drive, select the desired transmittal format in
the SynchLink Transmit Format field. For this example, select 4 Direct
Words, 8 Buffered Words.
2. In the Transmitted Direct Words section, select Drive Parameter in the
Source 0 field and parameter “43 - S Curve Spd Ref ” in the Item 0 field.
3. Click .