Rockwell Automation 20D PowerFlex 700S with Phase I Control Reference Manual - Manual (Page 171)

Rockwell Automation Publication PFLEX-RM002D-EN-E - August 2013 171
Detail Drive Configuration and Operation Chapter 1
Follower PowerFlex 700S Setup (Receiving Drive)
1. In the slave drive, select 4 Direct Words, 8 Buffered Words in the
SynchLink Receive Format field, to match the size of the data transmitted
from the master drive.
2. If desired, the multiply block can be used to change the scaling of one of
the Direct Words coming from the master to the follower. For example, the
multiply block might be used to enter a gear ratio for the speed reference.
3. Click .