Rockwell Automation 20D PowerFlex 700S with Phase I Control Reference Manual User Manual
Rockwell Automation Equipment
Advertising
Table of contents
Document Outline
- PowerFlex 700S Adjustable Frequency AC Drive, Phase I Control, Reference Manual
- Summary of Changes
- Table of Contents
- Preface
- Chapter 1
- Detail Drive Configuration and Operation
- Accel Time
- Alarms
- Analog Inputs
- Analog Outputs
- Auto/Manual
- Autotune
- Auxiliary Power Supply
- Bus Regulation/Braking
- Cable, Control
- Cable, Motor Lengths
- Cable, Power
- Cable Trays and Conduit
- Carrier (PWM) Frequency
- CE Conformity
- Common Bus Systems
- Communication
- ControlNet (20-COMM-C)
- Copy Cat
- Current Limit
- Datalinks
- Decel Time
- DeviceNet (20-COMM-D)
- Digital Inputs
- Digital Outputs
- Direction Control and Bipolar Reference
- Drive Overload
- Drive Overtemperature (Frame 9 Only)
- Drive Peripheral Interface (DPI)
- DriveLogix
- Droop
- Dynamic Braking
- Efficiency
- Electronic Gearing
- Faults
- Filters
- Flying Start
- Friction Compensation
- Grounding, General
- HIM Memory
- HIM Operations
- Inertia Adaptation
- Inertia Compensation
- Input Devices
- Circuit Breakers/Fuses
- Filters, EMC
- Input Modes
- Input Power Conditioning
- Jog
- Links
- Masks
- Motor Control Mode
- Motor Nameplate
- Motor Overload
- Motor Start/Stop Precautions
- Mounting
- Output Devices
- Output Display
- Overspeed Limit
- Owners
- Permanent Magnet Motors
- Position Loop - Follower (Electronic Gearing)
- Technical Information
- Overview
- Speed Reference Selection
- Speed Reference Ramp
- Enabling the Position Loop
- Position Reference Selection
- Set the EGR (Electronic Gear Ratio) and Speed Reference Scaling
- Position Offset
- Position Loop Output Limits
- Tuning Tips
- Jogging a Position Follower Independent from the Master
- Position Loop - In Position Detect
- Position Loop - Point to Point
- Position Loop - Position Watch
- Position Loop - Registration
- Power Loss/Ride Through
- Precharge Frames 1…4
- Precharge Frames 5 and Higher AC Input “Stand Alone Drives”
- Precharge Frames 5 and Higher DC Input “Common Bus Drives”
- Ride Through Operation
- Ride Through Configuration
- Ride Through Timeout Fault
- Precharge Operation
- Precharge Timeout Fault
- External Precharge
- Precharge Staging
- Motor Sim Mode
- External Power Supply
- Preset Speeds
- Process PI Loop
- Pulse Elimination Technique (PET)
- Reflected Wave
- Remote I/O Adapter (20-COMM-R)
- RFI Filter Grounding
- S-Curve
- Speed Control, Speed Mode, Speed Regulation
- Speed PI Regulator
- Speed Reference
- Speed Reference Scaling
- Speed Reference Select
- Jog Reference
- Stop Command
- Direction Control and Bipolar Reference
- Speed Limits
- Accel/Decel Ramp and S-Curve
- Speed Reference Bypass and Delayed Speed Reference
- Inertia Compensation
- Friction Compensation
- Virtual Encoder
- Speed Reference Filter
- Speed Reference Scale
- Speed Trim 1
- Speed/Position Feedback
- Speed/Torque Select
- Start Inhibits
- Start/Stop Modes
- Start-Up
- Stop Modes
- SynchLink
- Sync Generator
- Test Points
- Thermal Regulator
- Torque Reference
- Unbalanced or Ungrounded Distribution Systems
- User Functions
- Voltage Class
- Watts Loss
- Detail Drive Configuration and Operation
- Appendix A
- Index
- Back Cover