Document Outline

• PowerFlex 700S Adjustable Frequency AC Drive, Phase I Control, Reference Manual
• Summary of Changes
  • New and Updated Information
• Table of Contents
• Preface
  • Additional Resources
• Chapter 1
  • Detail Drive Configuration and Operation
    • Accel Time
    • Alarms
      • Configuration:
      • Application Example:
    • Analog Inputs
      • Analog Input Specifications
      • Analog Input Configuration
    • Analog Outputs
      • Analog Output Specifications
      • Analog Output Configuration
    • Auto/Manual
    • Autotune
      • Autotune - Start-Up Menu
      • Motor Control
      • Motor Data
      • Feedback Configuration
      • Power Circuit Test
      • Direction Test
      • Motor Tests
      • Inertia Test
      • Troubleshooting a “MC Commissn Fail” Fault during Autotune
    • Auxiliary Power Supply
      • Frames 9 & Up
    • Bus Regulation/Braking
      • Description
      • Technical Information
      • Bus Regulator/Braking Configuration
    • Cable, Control
    • Cable, Motor Lengths
    • Cable, Power
    • Cable Trays and Conduit
    • Carrier (PWM) Frequency
    • CE Conformity
      • Low Voltage Directive (2006/95/EC)
      • EMC Directive (2004/108/EC)
    • Common Bus Systems
    • Communication
    • ControlNet (20-COMM-C)
      • Setup Information
      • Technical Information
      • ControlLogix Programming
      • Datalink Programming
      • Explicit Messaging
    • Copy Cat
    • Current Limit
    • Datalinks
      • Configuring Datalinks
    • Decel Time
    • DeviceNet (20-COMM-D)
      • Technical Information
      • SLC/PLC-5 System
    • Digital Inputs
      • Technical Information
      • Configuration Example
      • Digital Input Status Bits
    • Digital Outputs
      • Technical Information
      • Configuration Example
      • Digital Output Status Bits
    • Direction Control and Bipolar Reference
    • Drive Overload
      • Theory of Operation
    • Drive Overtemperature (Frame 9 Only)
    • Drive Peripheral Interface (DPI)
      • Client/Server
      • Producer/Consumer Operation Overview
      • Peer-to-Peer Operation
    • DriveLogix
    • Droop
    • Dynamic Braking
    • Efficiency
    • Electronic Gearing
    • Faults
      • Configuration:
      • Application Example:
    • Filters
      • Key Words
      • Nomenclature:
      • Low Pass Filter
      • Second Order Low Pass Filter
      • Lead-Lag Filter
      • Notch Filter
      • Conclusion
    • Flying Start
      • Sensorless Flying Start Operation
      • Sensorless Flying Start Configuration
    • Friction Compensation
    • Grounding, General
    • HIM Memory
    • HIM Operations
      • The User Display
    • Inertia Adaptation
      • Configuration:
    • Inertia Compensation
    • Input Devices
    • Circuit Breakers/Fuses
    • Filters, EMC
    • Input Modes
    • Input Power Conditioning
    • Jog
    • Links
      • Using the HIM
      • Using DriveExecutive
    • Masks
    • Motor Control Mode
    • Motor Nameplate
    • Motor Overload
      • Low Overload
      • High Overload
    • Motor Start/Stop Precautions
      • Input Contactor
      • Output Contactor
    • Mounting
    • Output Devices
      • Drive Output Disconnection
      • Cable Termination
      • Output Reactor
    • Output Display
      • Output Current (Parameter 308)
      • Output Frequency (Parameter 310)
      • Output Power (Parameter 311)
      • Output Voltage (Parameter 307)
    • Overspeed Limit
    • Owners
    • Permanent Magnet Motors
    • Position Loop - Follower (Electronic Gearing)
      • Technical Information
      • Overview
      • Speed Reference Selection
      • Speed Reference Ramp
      • Enabling the Position Loop
      • Position Reference Selection
      • Set the EGR (Electronic Gear Ratio) and Speed Reference Scaling
      • Position Offset
      • Position Loop Output Limits
      • Tuning Tips
      • Jogging a Position Follower Independent from the Master
    • Position Loop - In Position Detect
    • Position Loop - Point to Point
      • Technical Information
      • Overview
      • Speed Reference Selection
      • Enabling the Position Loop
      • Position Reference Selection
      • Position Reference Scaling
      • Position Offset
      • Point to Point Acceleration and Deceleration
      • Position Loop Output Limits
      • Tuning Tips
      • Jogging
      • Point to Point Re-Reference
    • Position Loop - Position Watch
    • Position Loop - Registration
      • Port 0 Example
    • Power Loss/Ride Through
      • Precharge Frames 1…4
      • Precharge Frames 5 and Higher AC Input “Stand Alone Drives”
      • Precharge Frames 5 and Higher DC Input “Common Bus Drives”
      • Ride Through Operation
      • Ride Through Configuration
      • Ride Through Timeout Fault
      • Precharge Operation
      • Precharge Timeout Fault
      • External Precharge
      • Precharge Staging
      • Motor Sim Mode
      • External Power Supply
      • Preset Speeds
    • Process PI Loop
      • Process PI Reference and Feedback
      • Process PI Regulator
      • Process PI Limits
      • Process PI Output
    • Pulse Elimination Technique (PET)
    • Reflected Wave
    • Remote I/O Adapter (20-COMM-R)
      • ControlLogix System
      • Reference/Feedback Programming
      • Datalink Programming
      • Explicit Block Transfer Messaging
      • SLC/PLC-5 System
      • Explicit Block Transfer Messaging
    • RFI Filter Grounding
    • S-Curve
    • Speed Control, Speed Mode, Speed Regulation
    • Speed PI Regulator
      • Speed Trim
      • Autotune Speed Reference
      • Speed Reference Limits
      • Current Limit Stop
      • Speed Error
      • Servo Lock
      • Speed Regulation Anti-Backup
      • Proportional Gain
      • Integral Gain
      • Droop
      • Speed Regulator Output Limits
      • Speed Regulator Output Filter
      • Speed Regulator Tuning
    • Speed Reference
      • Speed Reference Scaling
      • Speed Reference Select
      • Jog Reference
      • Stop Command
      • Direction Control and Bipolar Reference
      • Speed Limits
      • Accel/Decel Ramp and S-Curve
      • Speed Reference Bypass and Delayed Speed Reference
      • Inertia Compensation
      • Friction Compensation
      • Virtual Encoder
      • Speed Reference Filter
      • Speed Reference Scale
      • Speed Trim 1
    • Speed/Position Feedback
      • Feedback Device
      • Encoder
      • Sensorless
      • Motor Simulator
      • Feedback Option Cards
      • Motor Position Feedback
      • Motor Speed Feedback and Scaled Speed Feedback
      • Speed Feedback Loss Ride Through
    • Speed/Torque Select
      • Speed Regulation Mode
      • Torque Regulation Mode
      • Min Mode / Max Mode
      • Sum Mode
      • Zero Torque Mode
      • Absolute Min Mode
    • Start Inhibits
    • Start/Stop Modes
      • Description
      • Technical Information
      • Configuring the Start and Stop for 3-Wire Control (Momentary Start and Stop)
      • Configuring the Start and Stop for 2-Wire Control (Maintained Start and Stop)
    • Start-Up
    • Stop Modes
    • SynchLink
      • Technical Information
      • SynchLink Configuration
      • SynchLink Direct Data
      • Multiply Block
      • Buffered Data
      • Speed Synchronization Example:
      • Master PowerFlex 700S Drive Setup (Transmitting Drive)
      • Follower PowerFlex 700S Setup (Receiving Drive)
    • Sync Generator
      • Configuration:
    • Test Points
    • Thermal Regulator
    • Torque Reference
      • Torque Reference Input
    • Unbalanced or Ungrounded Distribution Systems
      • Unbalanced Distribution Systems
      • Ungrounded Distribution Systems
    • User Functions
      • Peak Detect
      • Selector Switches
      • Time Axis Generator
      • Limit Generator
    • Voltage Class
    • Watts Loss
• Appendix A
  • History of Changes
    • PFLEX-RM002C-EN-E
• Index
• Back Cover