KEYENCE LK-G Series - Manual (Page 139)

5-9
5
LK-G-M-NO5-E
5 RS-232C
Command details
This section describes the details of the incoming commands and the responses that are
sent when the incoming commands are properly processed.
■
Measurement value output
Outputs a measurement value.
■ Timing ON/OFF
Refer to " Outline of the command format " (page 5-5) for the response command when
an abnormality has occurred.
Refer to "Timing Chart" (page 5-21) for the response delay time of the response
command.
Incoming command
Response command
CR
OUT number
0 : OUT1+OUT2
1 :
OUT1
2 : OUT2
The same OUT number as that of the incoming command.
Measurement value format Measurement value format
M h h h h h h [ , h h h h h h h h ] CR h h a ,
M a
Incoming command
Response command
CR T p , a
CR T p
ON/OFF number
0 : OFF
1 : ON
OUT number
0 : OUT1+OUT2
1 : OUT1
2 : OUT2
The same ON/OFF setting as that of
the incoming command.