KEYENCE LK-G Series - Manual (Page 193)

A-9 LK-G-M-NOA-E
G
GO ........................................................ 2-3
H
Head ..................................................... 1-4
Head connectors .................................. 1-7
Head Settings .............................. 1-25, 3-3
Height-difference measurement ......... 3-18
HIGH ..................................................... 2-3
Hold Function...................................... 3-25
Hysteresis ............................................. 2-5
I
Identifying Part Names and Functions..... 1-6
Inadequate light intensity.................... 3-30
Influence of ambient temperature............ 2
Initialization ......................................... 3-48
Input and output signals for measurement
control ................................................... 4-7
Input response time ............................ 4-18
Input/Output Terminals ......................... 4-2
Installation environment ........................... 2
Installing the Controller ....................... 1-17
Installing the single unit type
controller ....................................... 1-18
Installing the separate type
controller ....................................... 1-18
Installing the Head................................ 1-9
L
Laser emission LED ....................... 1-7, 1-8
Laser remote interlock connector ............ 6
List of Default Values and
Setting Ranges (Common Settings) ... 3-37
List of Default Values and Setting
Ranges (Environment Settings) ......... 3-47
List of Default Values and Setting
Ranges (Head Settings) ...................... 3-3
List of Default Values and Setting
Ranges (OUT Settings)....................... 3-15
List of Functions and Function Nos.
(Head Settings) ..................................... 3-3
List of Functions and Function Nos.
(Environment Settings)........................ 3-46
List of Functions and Function Nos.
(Common Settings) ............................. 3-37
List of Functions and Function Nos.
(OUT Settings) .................................... 3-13
List of Optional Products.......................A-6
List of the Common Function Setting
Screens ............................................... 3-38
List of the Head Setting Screens .......... 3-4
List of the OUT Setting Screens.......... 3-16
LOW ...................................................... 2-3
M
Measurement Control Command
Format................................................... 5-8
Measurement mode ............................ 3-25
Measurement value format ................... 5-6
Minimum display unit .......................... 3-33
Minimum input time............................. 4-18
Mirror reflection ................................... 3-12
Mode change command ...................... 5-7
Multi-reflective object............................ 3-7
Mutual Interference ............................. 6-27
Mutual interference prevention
function ............................................... 3-40
N
No-voltage input ................................. 4-10
Normal mode ........................................ 5-3
Number of digits to be displayed ....... 3-33
O
Offset .................................................. 3-32
Open-collector output ............... 4-10, 4-11
Operation keys...................................... 1-6
OUT Settings....................................... 1-25
Outside Dimensions ........................... 6-17
Output form of the tolerance
comparator ......................................... 3-42