KEYENCE LK-G Series User Manual
Page 79
3-21
3
LK-G-M-NO3-E
3 Function Settings
4
Press the
key to set the input value 1 of the head A,
point 1 by using the
and
keys.
The current measurement value is loaded if the
key
is pressed.
5
Press the
key to set the input value 1 of the head A,
point 1 by using the
and
keys.
6
Press the
key to set the input value 2 of the head A,
point 2 by using the
and
keys.
The current measurement value is loaded if the
key
is pressed.
7
Press the
key to set the input value 2 of the head A,
point 2 by using the
and
keys.
8
Press the
key to register the setting result. Press the
key to return to the measurement state.
When the following conditions are not satisfied, "
Err-7
" is displayed and the setting can-
not be performed. Press the
key to cancel the error, and set the scaling again.
(1) Input value 1 - Input value 2 0
(2)
If the
key is pressed while inputting the value, the current measurement value is
inputted. If it is pressed for three seconds, the default value is inputted.
OUT1
HI
GO
LO
HI
GO
LO
TIM
OUT2
TIM
OUT1
HI
GO
LO
HI
GO
LO
TIM
OUT2
TIM
OUT1
HI
GO
LO
HI
GO
LO
TIM
OUT2
TIM
OUT1
HI
GO
LO
HI
GO
LO
TIM
OUT2
TIM
Note
Displayed value2 - Displayed value 1
<10
Input value 2 - Input value 1
Reference