KEYENCE LK-G Series - Manual (Page 55)

2-9
2
LK-G-M-NO2-E
2 Operations and Functions during Measurement
Switching Program Nos.
This section describes the Program No. switch function, which can easily change the operation
settings.
■ Display panel
1
Press the key.
The program selection screen appears.
2
Select a program No. by using the key.
3
Press the key to register it, and return to the measurement state.
■ External input terminal
Program No. can be changed by using the P1, P2, and P3 of the expansion connector.
■ RS-232C interface
You can send the command from the external devices by using the RS-232C interface to
switch program Nos.
The method of switching the program Nos. varies depending on the setting of "Setting the
Program Switching Method" (page3-50) in the Environment settings.
Refer to "Expansion Connector" (page 4-5).
Refer to "Chapter 5 RS-232C" (page 5-RS-232C).
Function No. Selection item Operation method
"b-0" "PANEL" Panel operation/RS-232C interface
"b-1"
" "
External terminal input
OUT1 HI GO LO
HI GO LO
TIM
OUT2 TIM
Note
E T