KEYENCE LK-G Series - Manual (Page 83)

3-25
3
LK-G-M-NO3-E
3 Function Settings
Using the Hold Function (Measurement Mode)
This section describes the six types of measurement modes.
The function of each measurement mode is as follows.
For the sampling period, Trigger 1 and Trigger 2 are available depending on the trigger setting.
Function No. Mode name Description Reference page
d-0
nor a l
Normal The measured result
can be displayed or
outputted as
required. page 3-27
d-1
P-k
Peak hold The maximum value
during the specified
period can be
measured. page 3-28
d-2
b-k
Bottom hold The minimum value
during the specified
period can be
measured. page 3-28
d-3
PP-k
Peak-to-
peak hold The differential value
of the maximum and
minimum values
during the specified
period can be
measured. page 3-28
d-4
SP-k
Sample-and-
hold The value at
the specified
moment can
be measured. page 3-29, 3-30
d-5
AvG-k
Average
hold The average value
during the specified
period can be
measured. page 3-28
Refer to "Setting the Trigger Condition" (page 3-31) for setting the trigger.
Sampling period
Max.value
Sampling period
Min. value
Max. value -
Min. value
Sampling period
TIMING
input
Sample-and-
hold value
Sampling period
Average value