KEYENCE LK-G Series - Manual (Page 46)

1-26
1
LK-G-M-NO1-E
1 Before Use
Returning the LK-Series to the Factory
Default Settings
You can initialize the controller and return the settings to the default settings when shipped from
the factory.
1
While pressing the key, turn on the power.
The measurement value indication shows “ n t ".
2
When you press the key again, the settings are initialized and the measure -
ment state is established.
The settings return to the default setting when shipped from the factory.
Refer to "Chpater 3 Function Settings" (page 3-1).