KEYENCE LK-G Series - Manual (Page 73)

3-15
3
LK-G-M-NO3-E
3 Function Settings
List of Default Values and Setting Ranges
Function Item Settable range Default value Remarks
A Calculation method Head A/Head B/Head A + Head
B/Head A-Head B/ Head A
transparent object displacement-
thickness/Head B transparent
object displacement-thickness
Head A
Calculation
between
waveforms 1/2/3/4/1-2/1-3/1-4/2-3/2-4/3-4 1 When the transparent
object displacement/
thickness is selected for
the calculation method
b Input value of the
first point -99.9999 to +99.9999 0.0000
Display value of the
first point -99.9999 to +99.9999 0.0000
Input value of the
second point -99.9999 to +99.9999 +1.0000
Display value of the
second point -99.9999 to +99.9999 +1.0000
[ Number of times of
moving average 1/4/16/64/256/1024/4096/16384/
65536/262144 256
Cutoff frequency 1000/300/100/30/10/3/1/0.3/0.1 100 Hz The LPF and HPF have
the same settable range.
d Measurement
mode Normal/peak hold/bottom hold/
peak-to-peak hold/average hold/
sample-hold Normal
E Trigger Trigger 1/Trigger 2 Trigger 1
F Offset -99.9999 to +99.9999 0.0000
G Minimum display
unit 0.01/0.001/0.0001/0.00001/0.1/
0.01 0.0001
k Display value of the
first point -99.9999 to +99.9999 +1.0000
Output value of the
first point -10.5 V to +10.5 V +10.000
Display value of the
second point -99.9999 to +99.9999 -1.0000
Output value of the
second point -10.5 V to +10.5 V -10.000
Analog-through ON/OFF OFF
Tolerance Tolerance upper limit -99.9999 to +99.9999 +5.0000
Tolerance lower limit -99.9999 to +99.9999 -5.0000
Hysteresis width 0 to +99.9999 +0.0000