KEYENCE LK-G Series - Manual (Page 84)

3-26
3
LK-G-M-NO3-E
3 Function Settings
■ Setting procedure of the measurement mode
The setting procedure is described below for the case where peak hold is set to OUT1 as an
example.
1
Hold down the key, and select " oUt-1 " with the
key.
2
Press the key, and select function " d " with the
key.
Select Hold.
3
Press the key, and select " d-1 " with the key.
"Peak hold" is selected in this example.
4
Press the key to register the setting. Press the
key to return to the measurement state.
OUT1 HI GO LO
HI GO LO
TIM
OUT2 TIM
OUT1 HI GO LO
HI GO LO
TIM
OUT2 TIM
OUT1 HI GO LO
HI GO LO
TIM
OUT2 TIM