KEYENCE LK-G Series - Manual (Page 29)

1-9
1
LK-G-M-NO1-E
1 Before Use
Installing and Connecting the Heads and Optional Parts
Installing the Head
Adjust the distance between the head and the measuring target, and fix the head with the
screws at the two installation holes.
Insulated mounting is recommended when using the head under the positive grounding
environment.
■ LK-G15/LK-G10
The measurement range is shown in the figure below.
* The value inside the parentheses ( ) is when the sampling rate is 20 µs.
The laser emission LED at both diffuse reflection and specular reflection lights in green
within ±0.05 mm of the reference position, and lights in orange in the other positions in the
measurement range.
Note
LK-G10
M4r35 mm or more
• Installation procedure
LK-G10
Reference
distance
10 mm
Reference
distance
0 mm
+1mm
Measurement range
–1 mm
(–0.37mm)
Reference