KEYENCE LK-G Series - Manual (Page 166)

6-12
6
LK-G-M-NO6-E
6 Specifications of the LK-G Series
■ LK-G407/LK-G402
*1 The value when measuring the KEYENCE standard target (ceramic) in the standard mode. When
the sampling rate is 20 µs, the value becomes –70 (NEAR side) to –100 mm (NEAR side) at the
time of the diffuse reflection, and –70 (NEAR side) to –99 mm (NEAR side) at the time of the spec-
ular reflection.
*2 The value when measuring the KEYENCE standard target (ceramic) in the standard mode
*3 The value when measuring the KEYENCE standard target (SUS) 4096 times average at the
reference distance.
Model LK-G407/LK-G402
Setting mode Diffuse reflection Specular reflection
Reference distance 400 mm 398 mm
Measurement range *1 ±100 mm ±99 mm
Light source Red semiconductor laser
Wavelength 650 nm (visible light) class 2 (IEC60825-1)
class 2 (CDRH)
Output 0.95 mW max.
Spot diameter (at reference dis-
tance) Approx. 290 X 8300 µm (G407)
Approx. ø290 µm (G402)
Linearity*2 ±0.05% of F.S. (F.S. = ±100 mm)
Repeatability *3 2 µm
Sampling rate 20/50/100/200/500/1000 µs
(Selectable among six steps)
LED indication Near the center of measurement range: Lights in green
Within the measurement range: Lights in orange
Outside the measurement range: Flashes in orange
Temperature characteristics 0.01% of F.S./°C (F.S. = ±100 mm)
Environmental
resistance Enclosure rat-
ing IP67 (IEC60529)
Operating
ambient light Incandescent lamp or fluorescent lamp: 5000 lux max.
Operating
ambient tem-
perature 0 to +50 °C
Operating
ambient
humidity 35 to 85% RH (No condensation)
Vibration resis-
tance 10 to 55 Hz, double amplitude 1.5 mm,
2 hours for each of XYZ axes
Material Aluminum die-cast
Weight (including cable) Approx. 380 g