KEYENCE LK-G Series - Manual (Page 44)

1-24
1
LK-G-M-NO1-E
1 Before Use
Outline of Measurement and Settings
Switching Modes
The LK-G has the following modes :
* Program switch mode : Switches between stored programs
* Tolerance setting mode : Sets “Hi” and “Lo” limits
* Setting mode : Used for setup of various functions and settings
* Measurement mode : Performs measurement
OUT1 HI GO LO
HI GO LO
TIM
OUT2 TIM
OUT1 HI GO LO
HI GO LO
TIM
OUT2 TIM
OUT1 HI GO LO
HI GO LO
TIM
OUT2 TIM
Setting mode
Press the [SET] key. Press the [PROGRAM] key.
Tolerance setting mode Program switch mode
Sets the functions such as the head
and the measurement process.
Chapter 3 "Function Settings"
(page 3-1)
The parameters can easily be changed if
necessary when calling up the program.
Chapter 2 "Operations and Functions during
Measurement" -"Program Function" (page 2-8) The upper limit, lower limit, or
hysteresis can be set in the
Tolerance setting mode.
Press the [SET] key for one second.