KEYENCE LK-G Series - Manual (Page 57)

2-11
2
LK-G-M-NO2-E
2 Operations and Functions during Measurement
■ Setting procedures of statistical data
1
Press the key to change the screen to show the single display.
Set the OUT No. of which statistical data is to be displayed.
2
Press the key.
The screen changes to the statistical data
display.
The upper limit of the tolerance setting is
displayed.
3
Press the key and check the statistical data in order.
For details of the displaying order, refer to page 2-10.
4
Press the key to return to the measurement value display.
When displaying both OUT1 and OUT2 during measurement, the statistics cannot be dis-
played.
• The measurement and statistical computation are performed even when the statistical
data are displayed.
• In the statistics display screen, if no key operation is performed for 60 seconds, the
screen returns to the measurement state.
OUT1 HI GO LO
HI GO LO
TIM
OUT2 TIM
Name of statistical
data
Statistical data
Note
Reference