Canon W8400 User Manual
Canon Printers
Advertising
Chapter 3
Printing by Objective
Chapter 7
Operating the
Function Menu
i
User’s Guide
Chapter 3 Printing by Objective
Chapter 5 Using the Printer in a Network
Chapter 7 Operating the Function Menu
Quick Menu
Loading Roll Media
Unexpected Printing Results
Removing Media Jams
Message Is Displayed
Ink in a Tank Run Out
Operation Panel Setting List
Printer Driver
Options
• Setup the Media Take-up Unit
• Cutter Unit
imagePROGRAF Print Plug-In for Photoshop Guide
imagePROGRAF HDI Driver Guide
Media Configuration Tool Guide
Windows
Macintosh
Windows
Windows
Macintosh
Advertising
Table of contents
Document Outline
- Chapter 1 Basic Use
- Chapter 2 Using Various Media
- Media You Can Use
- The Suitable Black Ink for Media
- Paper Type
- Media Type
- Plain Paper*
- CAD Plain Paper*
- Plain Paper (High Quality)*
- Recycled Coated Paper
- Coated Paper*
- Heavyweight Coated Paper*
- Premium Matte Paper
- Extra Heavyweight Coated Paper
- Glossy Photo Paper*
- Semi-Glossy Photo Paper*
- Heavyweight Glossy Photo Paper
- Heavyweight SemiGlos Photo Paper
- Synthetic Paper*
- Adhesive Synthetic Paper*
- Backlit Film*
- Flame-Resistant Cloth
- Fabric Banner
- Proofing Paper*
- Newsprint for Proofing
- Fine Art Photo
- Fine Art Heavyweight Photo*
- Fine Art Textured*
- Canvas Matte
- Canvas Semi-Glossy
- Japanese Paper Washi
- Colored Coated Paper
- CAD Tracing Paper
- CAD Translucent Matte Film
- CAD Clear film
- Media Size
- Media Type Sizes and Print Area
- Handling Paper and Other Print Media
- Printing with Rolls Media
- Printing with Cut Sheets
- Change the height of the printhead
- Using the Media Take-up Unit
- Media You Can Use
- Chapter 3 Printing by Objective
- Printing from Windows
- Before You Begin
- Enlarging and Reducing the Original
- Printing Photos and Illustrations without Borders (Borderless Printing)
- Rotating the Page 90 Degrees for Printing (Conserve Paper)
- Printing Several Pages on One Sheet (Page Layout)
- Printing Posters (Page Layout)
- Using Watermarks
- Vertical and Horizontal Banner Printing (Long Prints)
- Matching the Width of the Roll
- <If you are using Microsoft Word...>
- b Select Landscape for the Orientation, and then click the OK button to close the Page Setup dialog box.
- b Select Landscape for the Orientation, and then click the OK button to close the Page Setup dialog box.
- c Click the OK button to close the Page Setup dialog box.
- b Click the OK button to close the Page Setup dialog box.
- Matching the Width of the Roll
- Printing without Top and Bottom Margins (Conserve Paper)
- Custom Print Quality
- Fine Adjusting Color for Printing
- About Size Options
- When the Printout Quality Is Not Clean
- Software Provided for Windows
- Printing from a Macintosh
- Before You Begin
- Enlarging and Reducing the Original
- Printing Photos and Illustrations without Borders (Borderless Printing)
- Rotating the Page 90 Degrees for Printing (Conserve Paper)
- Printing Several Pages on One Sheet (Page Layout)
- Printing Posters (Page Layout)
- Vertical and Horizontal Banner Printing (Long Prints)
- Printing without Top and Bottom Margins (Conserve Paper)
- Custom Print Quality
- Fine Adjusting Color for Printing
- Custom Sizes (User Print Settings)
- When the Printout Quality Is Not Clean
- Software Provided for Macintosh
- Printing from Windows
- Chapter 4 Maintenance
- Replacing Ink Tanks
- Cautions About Using Refilled Ink Tanks for This Printer
- Cleaning the Printer
- Replacing the Maintenance Cartridge
- Replacing the Printhead
- Replacing the Cutter Blade
- Moving the Printer
- Confirming the Print Condition
- Cleaning the Printhead
- Aligning the Printhead
- Adjusting the Amount of Media Feed
- Reducing the Amount of Cutting Dust
- Changing the Black Ink Type
- Chapter 5 Using the Printer in a Network Environment
- Before Using the Printer
- TCP/IP Network Settings (Windows, Macintosh, UNIX)
- Procedures Required for a TCP/IP Network
- Connecting the LAN Cable
- 1. Press the Online button twice to display MAIN MENU.
- 2. Press the [3] or [4] buttons to select Interface Setup, and then press the [6] button.
- 3. Press the [3] or [4] buttons to select Ethernet Driver, and then press the [6] button.
- 4. Press the [3] or [4] buttons to select Auto Detect, and then press the [6] button.
- 5. Press the [3] or [4] buttons to select Off, and then press the OK button.
- 6. Press the [3] or [4] buttons to select Comm.Mode, and then press the [6] button.
- 7. Press [3] or [4] to select Half Duplex or Full Duplex then press OK button.
- 8. Press the [3] or [4] buttons to select Ethernet Type, and then press the [6] button.
- 9. Press [3] or [4] to select 10 Base-T or 100 Base-TX then press OK button.
- 10. Press the [3] or [4] buttons to select Spanning Tree, and then press the [6] button.
- 11. Press [3] or [4] to select Use or Not Use then press OK button.
- 12. Press the Online button.
- 13. If Store Setting OK? is displayed, press the OK button.
- Setting the Printer IP Address
- Configuring TCP/IP Protocol Settings
- Configuring the Printer for Sharing
- Macintosh Network Settings
- NetWare Settings (Windows)
- Printing with UNIX
- Initializing the Network Settings
- List of Network Settings
- Software Applications Used to Configure Network Settings
- Chapter 6 Troubleshooting
- Chapter 7 Operating the Function Menu
- 無題