Canon W8400 - Manual (Page 32)

1- 29
‹ Function Menus
TOP
Chapter 3
Printing by Objective
Chapter 4
Maintenance
Chapter 5
Using the Printer
in a Network
Environment
Chapter 6
Troubleshooting
Chapter 7
Operating the
Function Menu
Index
Contents
Chapter 2
Using Various Media
Chapter 1
Basic Use
Print Job Log Prints a list of information about printed jobs, including
media size and type, amount of ink consumed, etc.
Nozzle Check Prints the nozzle check pattern.
Media Details Prints a list of media type settings.
Information
Version Displays the version numbers of the printer unit
and firmware.
RAM Displays the memory capacity of the printer.
Ext. Interface Displays the name of the interface that can be
used at the expansion slot.
MAC Address Displays the MAC address of the network
interface. This menu is displayed only when the
network interface is installed.
Error Log Displays the most recent error message.
Job Log Displays information regarding the maximum of
the last three print jobs printed.
Document Name Displays the document name from the print job.
User Name Displays the user name from the print job.
Page Count Displays the number of pages in the print job.
Job Status Displays the result of processing the print job.
Print Start Time Displays the time that the print job was started.
Print End Time Displays the time that the print jobs ended.
Print Time Displays the time elapsed for the print job.
Print Size Displays the size of the media used in the print job.
Media Type Displays name of the media type used in the print job.
Interface Displays the job interface.
Coverage Displays the ink density of each color used in
the print job.
Counter
Cut Count Displays the number of cuts made by the
standard cutter. You can reset this counter after
the cutter blade has been replaced.
Option Cut Displays the number of cuts made by the
optional cutter. You can reset this counter after
the cutter blade has been replaced.
Menu Item Setting Values Function