Canon W8400 - Manual (Page 298)

5- 2
‹ Before Using the Printer
トップ
Chapter 3
Printing by Objective
Chapter 4
Maintenance
Chapter 5
Using the Printer
in a Network
Environment
Chapter 6
Troubleshooting
Chapter 7
Operating the
Function Menu
Index
TOP
Contents
Chapter 2
Using Various Media
Chapter 1
Basic Use
Before Using the Printer
This section describes information you need to know before
using the optional network interface board, such as the
supported network environments and how to check the
network environment you are using. It is recommended that
the network settings are made by the network administrator.
System Requirements
This section describes the system environments that are
compatible with the printer network interface. The following
system environment is required depending on the network
to be used.
„ Using a TCP/IP Network for Printing
z Compatible Operating Systems
• Windows Server 2003
• Windows XP
• Windows 2000
• Windows NT 4.0
• Windows Me, Windows 98
• Mac OS 8.6 or later
• Mac OS X ver 10.1 or later
• Solaris Version 9
• Red Hat Linux 9
z Compatible Computers
• IBM PC or IBM compatible PC
• A Macintosh Series computer equipped with a
Power PC processor.
• Sun Microsystems SPARC platform computer
Note
z If you are using Windows NT 4.0, install Service Pack
6 or later.
z If using Mac OS X ver 10.2.5 or later, you can connect
using the Mac OS X Zeroconf function.
(Further, if using Mac OS 8.6 or 9.x, if the Canon
imagePROGRAF printer driver for Macintosh has been
installed, connection can be made using the Zeroconf
function.)
„ Using an AppleTalk Network for Printing
z Compatible Computers
• A Macintosh Series computer equipped with a
Power PC processor.
z Compatible Operating Systems
• Mac OS 8.6 or later
• Mac OS x 10.1 or later
z Compatible AppleTalk
• EtherTalk Phase 2
z Required Memory
• 24 MB or more for Mac OS 8.6, 32 MB or more for
Mac OS 9.x
• 128 MB or more is required for Mac OS x.
Note
z This printer is not compatible with a Macintosh
LocalTalk Network.