Canon W8400 - Manual (Page 40)

1- 37
‹ Printer Driver
TOP
Chapter 3
Printing by Objective
Chapter 4
Maintenance
Chapter 5
Using the Printer
in a Network
Environment
Chapter 6
Troubleshooting
Chapter 7
Operating the
Function Menu
Index
Contents
Chapter 2
Using Various Media
Chapter 1
Basic Use
Layout Sheet
The Layout sheet provides the following settings.
Maintenance Sheet
The Maintenance sheet provides the following settings.
Page Layout
This feature allows you to print multiple
pages onto a single sheet or enlarge a
single page and print it over several
sheets (poster printing).
Watermark
Overlays a watermark on the printed
image. You can freely configure the text,
border, angle, position and transparency
settings of a watermark and register the
watermark under an arbitrary name.
Print Centered
When the image to be printed is smaller
than the sheet, you can print the image
centered so the margins are even.
Rotate 180 degrees This feature rotates the image 180 degrees.
No Spaces at
Top or Bottom
(Conserve
Paper)
When the image to be printed is smaller than
the media, you can set the printer it does not
feed and there is no margin at the top or
bottom. This conserves roll paper.
Copies Specifies the number of copies to print.
Special
Settings...
If the print results are not what you expect, you
can change how the print job is processed.
Utility
Open the Status Monitor and display the
Utility sheet. This is used to print the
nozzle check pattern, perform printhead
cleaning, adjust the printhead position,
and adjust the feed amount.
For status prints, refer to the
Information tab in the status monitor.
Update Ink
Information
Sets the type of black ink. Click the Ink
Information button to automatically set
this setting to the black ink currently
loaded in the printer.