Index contents – Canon W8400 User Manual
Page 133
3- 16
Printing from Windows
Chapter 3
Printing by Objective
Chapter 7
Operating the
Function Menu
Note
z
If you change the page size to any other size that
allows borderless printing, the setting for the width of
the roll changes automatically to a roll width that
matches the original width.
z
If the settings are changed to a document size for
which borderless printing is not possible, the following
dialog box will be displayed. Specify the roll media
width from the Roll Paper Width list and then click the
OK button. Borderless printing will continue, but it will
be enlarged or reduced as necessary to fit the roll
media width. Printing to the same size as the
document is not possible.
5
Check the content of the settings Preview,
and then click the OK button.
Note
z
To obtain the correct print results, it is recommended to
check the print preview screen before printing. For the
print preview screen display, refer to
.
(
6
Click the Print button in the Print dialog box.
The print job starts.
Note
z
If Borderless Printing Method is set to Scale to fit
Roll Paper Width, the edges of the document will be
enlarged automatically at the top, bottom, left, and
right by 3 mm by the printer driver. Consequently, the
margin created by the printer configuration will be
covered, and borderless printing will be performed.
Parts that protrude beyond the 3 mm area at the edges
will not be printed.
z
Use Scale to fit Roll Paper Width in the Borderless
Printing Method to enlarge or reduce the size of the
document for borderless printing.