Index contents – Canon W8400 User Manual
Page 27
1- 24
Function Menus
Chapter 3
Printing by Objective
Chapter 7
Operating the
Function Menu
Color Adj.
No, Yes
Returns all colors to default settings (2).
Return Defaults
No, Yes
Returns all colors to default settings (2).
Color Adj. PM
1, 2*, 3
You can adjust the density of PM Y, M, C, K,
PM, PC one by one and perform the
corrections.
The settings can be performed in the range 1 to
3 (the standard default setting is 2). Set to 1 for
a light adjustment or set to 3 for a dark
adjustment.
Color Adj. PC
1, 2*, 3
Color Adj. Y
1, 2*, 3
Color Adj. M
1, 2*, 3
Color Adj. C
1, 2*, 3
Color Adj. K
1, 2*, 3
Interface Setup
EOP Timer
10 sec., 30 sec., 1 min., 2 min., 5 min.,
10 min*., 30 min., 60 min.
Sets the job timeout setting for the printer.
TCP/IP
Sets the TCP/IP protocol settings of the network
interface. After setting each TCP/IP item, select
Store Setting to save the settings and enable
them. This menu is displayed only when the
network interface is installed. (
→
TCP/IP
On
The setting for TCP/IP protocol is locked On.
This setting cannot be changed.
IP Mode
Manual*, Automatic
This setting determines whether the IP address
is set automatically or a fixed IP address is
entered manually.
Protocol
Selects the type of server when the printer is
set for automatic entry of the IP address.
DHCP
BOOTP
RARP
Off*, On
IP Setting
Sets the printer network information when
using a static IP address.
IP Address
Subnet Mask
Default G/W
0.0.0.0* to 255.255.255.255
Enter the IP address allocated to the printer,
network subnet mask, and default gateway.
Menu Item
Setting Values
Function