P.2-31, Index contents – Canon W8400 User Manual
Page 92
2- 31
Printing with Rolls Media
Chapter 3
Printing by Objective
Chapter 7
Operating the
Function Menu
6
Hold the roll holder such that the role media
end is down and towards you, and then align
the roll holder (b) with the left and right guide
grooves (c) and load the roll holder.
If the roll paper is wide and its edge is not straight,
take up the roll slack until the edges are straight then
set it.
7
Pull the roll media out keeping the right and
left sides even and insert it into the top of the
paper feed slot (d). Feed the roll media until
it makes contact with the paperweight (e).
Once the roll media has been advanced to where it
touches the paperweight, the roll media will
automatically be fed to the platen.
Important
z
If you see the media is wrinkled or curled, remove the
wrinkles or curls before loading the media.
8
Close the ejection guide.
b
c
c
b
e
d