Canon W8400 - Manual (Page 353)

6- 6
‹ Message Is Displayed
TOP
Chapter 3
Printing by Objective
Chapter 4
Maintenance
Chapter 5
Using the Printer
in a Network
Environment
Chapter 6
Troubleshooting
Chapter 7
Operating the
Function Menu
Index
Contents
Chapter 2
Using Various Media
Chapter 1
Basic Use
Load Cut Sheet
Cause 1: The printer is waiting for the roll media to be
loaded.
Solution 1: Load cut sheets of the type and size specified
to the printer using the next step. ( → P.2-38 )
1. Load cut sheets of the specified size and
type.
2. Select the media type.
3. Press the OK button.
Solution 2: Press and hold the Stop/Eject button for at
least 1 second to stop printing.
Remove Cut Sheet
Cause 1: The printer is waiting for you to remove the
ejected sheets.
Solution 1: Perform the procedure described below to
remove the sheets. ( → P.2-42 )
1. Open the top cover.
2. Lift the release lever, and remove the cut
sheets.
3. Lower the release lever.
4. Close the top cover.