How to replace the printhead, How to replace the printhead -22, Index contents – Canon W8400 User Manual
Page 267
4- 22
Replacing the Printhead
Chapter 3
Printing by Objective
Chapter 7
Operating the
Function Menu
How to Replace the Printhead
To replace the printhead, execute Replace P.head on the
Maintenance menu then follow the directions given by the
messages on the printer display. Load a roll or cut sheets of
A3 size or larger paper into the printer for the printhead
adjustment that runs after the printhead is replaced.
Remove printed media and cut sheets from the
printer.
Execute Replace P.head
Clean the intake ducts inside the top cover
Remove the printhead, and install the new printhead
Important
z
Always follow the prescribed procedure to replace the
printhead. If you do not adhere to the replacement
procedure, the printhead may leak ink that will stain
the printer and the surrounding area.
1
If the printer power is off, press the Power
button to switch the printer on.
After a few moments, Online appears in the display.
2
Press the Online button to display MAIN
MENU.
3
Press [
] or [
] to select Maintenance,
then press [
].
The maintenance functions are displayed.
4
Select Replace P.head then press [
].
5
Press [
] or [
] to select Yes, then press
OK button.
The message Please Wait.. is displayed and the
printer begins the printhead replacement operation.
This operation requires about 3 minutes to complete.
Open UpperCover is displayed when the printer is
ready.
Data
Information Power
Offline
Menu
Message
Online
Cleaning
(3 sec.)
Stop/Eject
(1 sec.)
MAIN MENU
Maintenance
↓
Maintenance
Replace P.head
↓
Replace P.head
Yes
MAIN MENU
Head Cleaning
Online
Cleaning
(3 sec.)
Stop/Eject
(1 sec.)