Index contents – Canon W8400 User Manual
Page 115
2- 54
Using the Media Take-up Unit
Chapter 3
Printing by Objective
Chapter 7
Operating the
Function Menu
3
Set the spool mode switch on the media
take-up unit to Manual.
4
Remove the weight roll from the roll media.
5
Press the Online button to display MAIN
MENU on the printer display.
6
Press [
] or [
] to select Force Cutting,
then press [
].
7
Select Yes using the [
] and [
] buttons
while holding the trailing edge of the printed
paper, and then press the OK button.
The roll media will be cut.
Important
z
If you are cutting roll media, make sure to hold the
trailing edge of the printed paper. If cutting is
performed without holding the paper, the paper may
fall to the floor and the printed surface become dirty.
MAIN MENU
Head Cleaning
Online
Cleaning
(3 sec.)
Stop/Eject
(1 sec.)
MAIN MENU
Force Cutting
↓
Force Cutting
Yes