Canon W8400 - Manual (Page 279)

4- 34
‹ Moving the Printer
TOP
Chapter 3
Printing by Objective
Chapter 4
Maintenance
Chapter 5
Using the Printer
in a Network
Environment
Chapter 6
Troubleshooting
Chapter 7
Operating the
Function Menu
Index
Contents
Chapter 2
Using Various Media
Chapter 1
Basic Use
5
Press [ ] or [ ] to select Yes, then press
OK button.
Open RightCover is displayed.
6
Open the right back cover.
Remove Ink Tank is displayed on the operation
panel.
7
Open the ink tank cover, then remove all the
ink tanks.
Place each ink tank in a plastic bag and seal the bag.
Note
z Store the removed tanks with the ink supply ports
facing up (a). If the ink tanks are stored with the ink
supply ports (a) facing down, ink may leak out.
8
Lock all of the ink tank covers, and press the
pocket of the right back cover upper face.
Then close the right back cover.
Please Wait.. appears followed by Ink Draining..
while the ink is sucked from inside the tubes. This
process requires about 4 minutes to complete.
The printer switches off automatically once the
process is complete.
9
Disconnect the power cord and interface
cable.
Move Printer
Yes
a