Canon W8400 - Manual (Page 338)

5- 42
‹ NetWare Settings (Windows)
トップ
Chapter 3
Printing by Objective
Chapter 4
Maintenance
Chapter 5
Using the Printer
in a Network
Environment
Chapter 6
Troubleshooting
Chapter 7
Operating the
Function Menu
Index
TOP
Contents
Chapter 2
Using Various Media
Chapter 1
Basic Use
7
Set Print Application to the service to use.
Note
z Only one of the services selected here will be enabled.
Multiple services cannot be enabled at the same time.
8
When using packet signing, set Packet
Signature to If Requested by Server.
9
Perform the following settings as required for
the selected service.
z Bindery PServer Selected: Queue Server Mode
(Using a Bindery Print Server)
Enter the file server name into File Server
Name.
For Print Server Name, enter the name of the
print server created in
“Setting Up a NetWare
Print Service” . ( → P.5-37 )
For Print Server Password, enter the print
server password created in
“Setting Up a
NetWare Print Service” . ( → P.5-37 )
Set the Polling Interval. Set the interval at
which to check the printer NetWare print
queue.
z RPrinter Selected:Remote Printer Mode (using a
Bindery Print Server)
For Print Server Name, enter the advertised
name of the print server created in
“Setting Up
a NetWare Print Service” . ( → P.5-37 )
For Printer Number, enter the same printer
number that you entered in
“Setting Up a
NetWare Print Service” . ( → P.5-37 )