Setting the printer ip address, Setting the printer ip address -7, P.5-7 – Canon W8400 User Manual
Page 303: Index top contents
5- 7
TCP/IP Network Settings (Windows, Macintosh, UNIX)
Chapter 3
Printing by Objective
Chapter 7
Operating the
Function Menu
Setting the Printer IP Address
The printer IP address needs to be configured so that the
computer you are using can communicate with the printer
before you can setup the printer protocol settings. Make the
settings in one of the following ways. Use the method that is
easiest for you.
z
GARO Device Setup Utility (
If you are using a Windows computer, make the settings
using the utility software.
z
ARP/PING command (
The printer IP address can be set using the command
screen. Set the subnet mask and default gateway using
the remote UI.
z
Printer Operation panel (
→
If you are using an AppleTalk connection on a Macintosh
computer, you will need to configure the settings using
the printer operation panel. However, if you are using a
Mac OS X v10.2.5 or later, or the Zeroconf function (IP
print (auto)) on Mac OS 8.6/9.x to connect, printing can
be performed even if the network settings of the printer
have not been configured.
Important
z
Before setting the IP address, confirm that the printer
is switched on and connected to the network.
Configuring the Printer Using the GARO
Device Setup Utility
If you are using Windows, use the “GARO Device Setup
Utility” (a software utility provided with the printer) to
perform the printer network settings.
z
Installing the GARO Device Setup Utility
Important
z
If you are using Windows Server 2003, Windows XP,
Windows 2000, or Windows NT 4.0, you must log in as
a member of the Administrators group.
1
Insert the provided “User Software” CD-ROM
into the computer CD-ROM drive.
The Setup Menu window is displayed.
Note
z
If the AutoPlay function is switched off, double-click the
My Computer icon on the desktop, click the CD-ROM
drive icon, and then from the File menu select
AutoPlay.