Canon W8400 - Manual (Page 200)

3- 83
‹ Printing from a Macintosh
TOP
Chapter 3
Printing by Objective
Chapter 4
Maintenance
Chapter 5
Using the Printer
in a Network
Environment
Chapter 6
Troubleshooting
Chapter 7
Operating the
Function Menu
Index
Contents
Chapter 2
Using Various Media
Chapter 1
Basic Use
Note
z To perform borderless printing with the manuscript
enlarged or reduced, refer to “Enlarge/Reduce to Fit Roll
Paper Width” in “<To do borderless document printing
with a size not allowed for borderless printing>”
( → P.3-84 ).
z If Borderless Printing mode is set to Scale to fit the
Page Size, the edges of the document will be enlarged
automatically at the top, bottom, left, and right by 3 mm by
the printer driver.
Consequently, the margin created by the printer
configuration will be covered, and borderless printing will
be performed.
Parts that protrude beyond the 3-mm area at the edges will
not be printed.
z If performing borderless printing to images for which there are blanks at the top and buttom of the print data, combine
printing with the No Spaces at Top or Buttom function in the Finishing panel sheet for simpler borderless printing
than borderless printing with no margins at top, bottom, left, or right. For details, refer to “Printing without Top and
Bottom Margins (Conserve Paper)” . ( → P.3-101 )