Canon W8400 - Manual (Page 280)

4- 35
‹ Moving the Printer
TOP
Chapter 3
Printing by Objective
Chapter 4
Maintenance
Chapter 5
Using the Printer
in a Network
Environment
Chapter 6
Troubleshooting
Chapter 7
Operating the
Function Menu
Index
Contents
Chapter 2
Using Various Media
Chapter 1
Basic Use
10
Open the top cover, and then open the
ejection guide.
Important
z Do not touch any areas other than as indicated. Doing
so may damage the printer.
11
Rewind the roll media back onto the roll and
remove the roll holder and the four spool
prevention stays, and then remove the
ejection guide.
12
Lower the holder stopper lever, remove the
stopper, remove the roll from the roll holder,
then store the roll holder and the holder
stopper.
13
Clamp the belt with the belt stopper then use
the hex screws to fasten the belt stopper.
Note
z Attach the belt stopper that you removed and stored
during the initial installation.
a