Index top contents – Canon W8400 User Manual
Page 307
5- 11
TCP/IP Network Settings (Windows, Macintosh, UNIX)
Chapter 3
Printing by Objective
Chapter 7
Operating the
Function Menu
The MAC address is printed in the Status Print at the
location indicated in the sample below.
z
Setting the IP Address
1
If you are using a Windows computer, open
an MS-DOS prompt or a command prompt.
If you are using UNIX or Linux, open the console
screen.
2
Execute the following commands to add
static entries to the arp table.
arp -s <IP Address> <MAC Address>
IP address:
Enter the IP address assigned to the printer. Enter
four numbers (0 to 255 in decimal) separated by full
stops. Have the network administrator check the
assigned address.
MAC Address:
Enter the dedicated MAC address of the printer.
Separate each set of two digits with a hyphen.
Entry Sample:
arp -s XXX.XXX.XXX.XXX 00-00-85-XX-XX-XX