Index contents – Canon W8400 User Manual
Page 26
1- 23
Function Menus
Chapter 3
Printing by Objective
Chapter 7
Operating the
Function Menu
Standard Adj.
No, Yes
Prints the adjustment pattern used to adjust the
position of the printhead, reads the results of
the pattern, and then automatically adjusts the
values for printhead positioning.
Auto Print
On*, Off
After the printhead has been replaced,
Advanced Adj. will be implemented
automatically.
Feed Priority
Band Joint*, Print Length
Selects the feed accuracy priority. Select Print
Length when you want the media feed length
to be accurate. When Print Length is selected,
color may blur slightly in the direction of
carriage scanning.
Adjust Band
Adjusts the amount of paper feed for each type
of media. (
)
Standard Adj.
No, Yes
The printer prints a band adjustment pattern,
then scans the resulting printout to
automatically determine adjustment values for
the paper feed settings for each type of media.
Advanced Adj.
No, Yes
Use if any paper other than standard Canon paper
or paper that has been approved for output has
been loaded. The adjustment value is set
automatically by reading the printed pattern. This
function takes more time than Standard Adj.,
however, and consumes more ink.
Fine Tuning
-3 ~ 0* ~ +3
Allows manual entry of a value to fine tune the
banal adjustment of the media selected for
printing.
Adjust Length
-0.70 ~ 0.00* ~ 0.70%
Adjusts the amount of stretching and shrinking
for each media type. Adjust the value to the
plus (+) side to set a larger feed volume for
media that stretches easily, or adjust it to the
minus (-) side to reduce the amount of feed for
media that shrinks easily. This menu is
displayed only if the Feed Priority has been
set to Print Length.
Menu Item
Setting Values
Function